The functional characteristics of Guangshengde U-shaped energy-saving lamp aging line:

Improve the quality of energy-saving lamps through the use of high, medium and low voltage, high temperature and high pressure, impulse voltage, and the use of analog voltage to gradually impact and switch the electronic energy saving lamp. Valley voltage layout, high temperature and high pressure system, ultra-low voltage start and instantaneous high voltage System to observe whether the entire energy-saving lamp can withstand the impact of these voltages, thereby improving the quality of these products;

The basic configuration and structure of Guangshengde U-shaped energy-saving lamp aging line:

1. Power: The motor adopts Taiwan-made Kun 1.5KW gear speed motor, the specific speed is 1:10; the 100-type WPA1:40 reducer, the joint venture Shenzhen-made easy drive 2HP inverter, frequency conversion speed control, linear speed 0— 2M/min is adjustable.

2. Body and frame: The frame is made of 50×40 (mm) steel pipe welding; the upper and lower parts of the body are made of 130×23 (mm) special aluminum alloy profiles for aging lines, and the guard plate is made of 1.2mm cold plate bending Manufactured, the feet are equipped with galvanized adjustable level cups.

3. Conveyor chain: C212-inch double-pitch single-lug double-hole chain produced by Shanghai Chain Factory.

4. Chain plate: using 2mm cold plate bending and rolling into 148×800×18 (mm), a total of 178 pieces in the whole line, each chain plate is equipped with 12 five-magazine E27 Luokou lamp holders, (E27 lamp holders can be passed through the conversion head Converted to E14.MR16.GU10 various LED bulbs for aging) and equipped with 6A high-breaking miniature circuit breaker; two-way conductive system (copper) is installed at the bottom of the chain plate, two conductive blocks are installed for each circuit, each plate A total of 2 are installed.

5. Daily output: This aging line can age 2136 LED bulbs at the same time; the user can age different output according to different aging time.

6. Light blocking shields: 12 sections of light blocking shields are set on both sides of the line body, which are made of a combination of brown plexiglass plate and aluminum alloy, which effectively attenuates the light of energy-saving lamps and better protects the eyes.

7. Conductive trough: The whole line is equipped with two conductive trough rails, which are laid by a combination of edge rubber plate and stainless steel strip.

8. Constant temperature zone: The constant temperature system is completed by electric heating, with two 2000W/set electric heating plates, automatic temperature constant temperature room temperature-60℃, digital intelligent RKC temperature control indicator.

9. Protective anti-drop net: A protective anti-drop net is set under the line to prevent the lamp from falling off. It is made of high-quality stainless steel fine mesh belt.

10. Impact beat circuit: set the middle area as the beat impact control area. The impact zone time is controlled by the touch screen, and the control time is adjustable.

11. Detection of sophisticated roaming area: during aging, the middle area is roaming area, so that the voltage fluctuates with the change of time, 160V—220V—265V continuously changes, and the roaming area time is controlled by the touch screen. The control time is adjustable.

14. Power of the whole line: 15KVA, a total of 5 Tianzheng brand voltage regulators (4 0-250V adjustable, 1 0-300V adjustable), a total of 7 voltage zones on both sides of the line, 160V, 180V, 220V, 240V, 250V (The specific distribution is determined by Party A's requirements).

15. Electrical control: voltage and motor operation instructions adopt digital display type, the whole system adopts 7-inch touch screen supporting PLC control, 5 voltage regulators, and 1 power distribution control cabinet.

16. Body color of U-shaped energy-saving lamp aging line: All aluminum alloy profiles are in primary colors, and the rest are computer white.